Verfahren Ejector :
Das Ejector-Tiefbohrverfahren wird im Durchmesserbereich von ca. 18 bis 250 mm eingesetzt.
Die Zufuhr des Kühlschmiermittels erfolgt zwischen dem Bohrrohr und einem Innenrohr ( Zweirohrverfahren ).
www.tbt.deEjector procedure :
The ejector deep hole drilling procedure is utilised in the diameter range from approx. 18 to 250 mm.
The coolant lubricant feed is between the boring tube and an inner tube ( two tube system ) The coolant lubricant emerges at the side on the boring head, which it rinses, and flows back with the chips through the inner tube.
www.tbt.deТук можете да ни предложите подобрения на този ПОНС запис:
Как мога да копирам преводите в езиковия трейнър?
Моля, имайте предвид, че думите в този списък са достъпни само в този браузър. След като ги прехвърлите в езиковия трейнър, те ще са достъпни от всички устройства.