Das System zur Herstellung von Hochleistungskeramik
Mit dem CeraFab 7500 bietet Lithoz ein komplettes System zur Herstellung von hochwertigen und voll funktionstüchtigen Bauteilen aus Hochleistungskeramik (Bauteildichte bis zu 99,4 % T.D.).
Der CeraFab 7500 ermöglicht die Generative Fertigung von Einzelstücken, Kleinserien und hochkomplexen Bauteilen aus unterschiedlichen keramischen Materialien - direkt aus CAD-Dateien.
www.lithoz.comThe system for the production of parts made of technical ceramics
With the CeraFab 7500 Lithoz offers a complete system for the production of high-quality and fully functional high-performance ceramic parts (density up to 99.4% T.D.).
The CeraFab 7500 allows for the production of prototypes, small scale series and highly-complex parts made of different ceramic materials and printed directly from CAD-files.
www.lithoz.comIKV )
5. April 2013 CO2 als Treibmittel für PUR-Formteile Neues Schäumverfahren des IKV verringert Bauteildichte
Das Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der RWTH Aachen entwickelt zur Herstellung von geschäumten PUR-Formteilen eine neue Schäumtechnologie.
www.ikv-aachen.deIKV )
5 April 2013 CO2 as a blowing agent for PU mouldings New IKV foaming process reduces part density
The Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts at RWTH Aachen University is developing a new foaming technology for the production of foamed polyurethane mouldings.
www.ikv-aachen.deAuf Basis der CT-Ergebnisse erfolgten 3D-Darstellungen der inneren Porenstrukturen, welche mittels metallographischen Zielpräparationen verifiziert wurden.
Die Genauigkeit der CT-Auswertung liegt absolut betrachtet bei etwa ±0,5 % Porosität, was umgerechnet auf die Bauteildichte des verwendeten Materials ±0,04 g/cm³ bedeutet.
Beim Vergleich der Dichtebestimmung mittels CT mit der gravimetrischen Dichtebestimmung wurden Abweichung von ±0,027 g/cm³ beobachtet.
research.fh-ooe.atFurthermore, 3D-visualizations of the inner pore structures, which were verified with micrographs by target metallography, are shown.
The accuracy of CT-evaluation is in absolute terms ±0.5 % porosity, which yields a component density in the used material of ±0.04 g/cm³.
When comparing the density using CT with the determined gravimetric density, a standard deviation of ±0.027 g/cm³ was observed.
research.fh-ooe.atИскате ли да добавите дума, израз или превод?
Изпратете ни нов запис.