Um das erzeugte Dateisystem automatisch während des Startvorgangs zu mounten, müssen Sie die Datenträgerinformation in die Datei / etc / fstab schreiben.
Dazu legen Sie einen permanenten Mountpunkt namens stripe an:
# mkdir /stripe # echo "/dev/stripe/st0a /stripe ufs rw 2 2" \ >> /etc/fstab
www.freebsd.czTo mount this striped file system automatically during the boot process, place the volume information in / etc / fstab.
In this example, a permanent mount point, named stripe, is created:
# mkdir /stripe # echo "/dev/stripe/st0a /stripe ufs rw 2 2" \ >> /etc/fstab
www.freebsd.cz# bsdlabel -wB / dev / stripe / st0
Dieser Prozess sollte zwei weitere Geräte im Verzeichnis /dev/stripe (zusätzlich zum Gerät st0) erzeugt haben.
Diese schliessen st0a und st0c ein.
www.freebsd.cz# bsdlabel -wB / dev / stripe / st0
This process should create two other devices in /dev/stripe in addition to st0.
Those include st0a and st0c.
www.freebsd.czGeschrieben von Tom Rhodes und Murray Stokely.
Striping (stripe = Streifen) ist eine Methode, um verschiedene Laufwerke in einem einzigen Datenträger zusammenzufassen.
In vielen Fällen wird dies durch die Nutzung von Hardware-Controllern bewerkstelligt.
www.freebsd.czWritten by Tom Rhodes and Murray Stokely.
Striping combines several disk drives into a single volume.
Striping can be performed through the use of hardware RAID controllers.
www.freebsd.czИскате ли да добавите дума, израз или превод?
Изпратете ни нов запис.